SH-480F-8 →
Eight-blade inline scoring on the same 35 m/min platform, lower tooling cost.
- Max. process area
- 480 x 445 mm
- Min. process area
- 55 x 55 mm
- Cutter
- 8 blades
Overview
SH-480F-10specification.
Built for plants that score the same panel family all day and cannot afford rework. Ten blades, automatic loading and unloading, and +-0.03 mm upper-to-lower blade alignment keep the groove centred run after run.
Key features
- Suitable for aluminium-based PCB and glass-fibre (FR-4) V-grooving
- Anti-collision blade self-locking system
- Throughput up to 35 m/min, replacing manual scoring stations
- Automatic board release and receiving; vacuum top-feeding prevents surface scratching
- Logs production quantity and blade metres for production management
- Intelligent blade-change test avoids tool collision and operator error
- Connects to front and rear conveyors for straight or turning inline flow
- Self-diagnostic fault codes reduce downtime and maintenance cost
Technical parameters
| Max. process area | 480 x 445 mm |
| Min. process area | 55 x 90 mm |
| Cutter | 10 blades |
| Conveying speed | 1-35 m/min |
| V-CUT parallel precision | +-0.03 mm |
| Min. distance to board edge | 3 mm |
| Jump-cut times | A / B blade, 20 cuts each |
| Process thickness | 0.6-3.2 mm |
| Residual thickness precision | +-0.05 mm |
| V-groove positioning precision | +-0.05 mm |
| Feeding / receiving | Fully automatic |
| Positioning method | Sideway (edge-referenced) |
| Power | AC 380 V, 4 HP |
| Air pressure | 5.5-6 kg/cm2 |
| Dust extraction | 40-45 m3/min, 110 mm port |
| Back-up conveyor length | 1,000 mm |
| Weight | 3,300 kg |
All figures are for the standard build. Custom blade count, conveyor length, panel size and voltage can be specified at order. Electrical and air supply requirements must be confirmed before installation.
