SH-480F-10 →
Inline scoring with ten blades, up to 35 m/min, +-0.03 mm parallel precision.
- Max. process area
- 480 x 445 mm
- Min. process area
- 55 x 90 mm
- Cutter
- 10 blades
Overview
SH-INLINE 16specification.
Single-direction scorers force you to run the panel twice. This line scores both axes in one pass with eight horizontal and eight vertical blades, then turns and transfers automatically. The standard choice for panel families that need cross grooves.
Key features
- 16 blades: 8 horizontal plus 8 vertical
- X and Y V-grooves completed in a single pass, no re-fixturing
- Automatic hydraulic system
- Steering and turning connection unit
- Automatic feeding and automatic unloading
- Right-angle inline configuration
- Blade layouts: 10+10, 8+10, 8+8 and 8+6
- Custom tooling layouts available
Technical parameters
| Configurations | 10+10 / 8+10 / 8+8 / 8+6 blades |
| Cutter | 16 blades (8 horizontal, 8 vertical) |
| Max. process area | 480 x 445 mm |
| Min. process area | 55 x 55 mm |
| Process thickness | 0.6-3.2 mm |
| Conveying speed | 1-35 m/min |
| V-CUT parallel precision | +-0.03 mm |
| Min. distance to board edge | 3 mm |
| Residual thickness precision | +-0.05 mm |
| V-groove positioning precision | +-0.05 mm |
| Feeding / receiving | Fully automatic |
| Positioning method | Sideway (edge-referenced) |
| Power | AC 380 V |
| Air pressure | 5.5-6 kg/cm2 |
| Dust extraction | 40-45 m3/min, 110 mm port |
| Front / rear conveyor | 1,000 mm each |
| Dimensions 10+10 | L 5,700 x W 4,620 x H 1,800 mm |
| Dimensions 8+10 | L 5,700 x W 4,350 x H 1,800 mm |
| Dimensions 8+8 | L 5,400 x W 4,350 x H 1,800 mm |
| Dimensions 8+6 | L 5,000 x W 4,280 x H 1,800 mm |
| Weight | 2,500 kg |
All figures are for the standard build. Custom blade count, conveyor length, panel size and voltage can be specified at order. Electrical and air supply requirements must be confirmed before installation.
