SH-480F-10 →
Inline scoring with ten blades, up to 35 m/min, +-0.03 mm parallel precision.
- Max. process area
- 480 x 445 mm
- Min. process area
- 55 x 90 mm
- Cutter
- 10 blades
Overview
SH-1250 / SH-1550specification.
For plants where groove position is the tolerance that matters. The gantry series references the panel by tooling pins and cuts every V-groove from a single program. The marble bed holds its geometry, so precision does not drift as the machine ages.
Key features
- All V-grooves cut from a single setup, no missed grooves and no human error
- Marble machine base: stable geometry, no long-term deformation, low cutting vibration
- Straight cutting and jump cutting on the same panel, in one program
- Software anti-collision protection built in
- Blade mounting and upper/lower alignment are fast to set
- PIN positioning for repeatable registration batch to batch
- CCD vision alignment: automatic compensation for board-edge and material growth deviation
- Upgrade version available with Y-axis linear motor (non-screw)
Technical parameters
| Model | SH-1250 / SH-1550 |
| Processing length | 50-600 mm |
| Processing width | 110-1,250 mm (SH-1250) / 210-1,550 mm (SH-1550) |
| Process thickness | 0.4-3.2 mm |
| Positioning mode | PIN positioning / CCD vision (optional) |
| PIN diameter | 2 / 3 / 1.75 mm |
| PIN spacing | 100 mm |
| Min. spacing, V-groove to PIN hole | 4 mm |
| Cutting speed | 1-35 m/min (60 m/min on linear-motor version) |
| Spindle speed | 7,000 rpm, adjustable |
| Parallel precision | +-0.05 mm |
| Residual thickness precision | +-0.05 mm |
| Spacing precision | +-0.05 mm |
| Operational height | 900 +- 30 mm |
| Air pressure | 0.5 MPa |
| Dimensions SH-1250 | 2,230 x 2,000 x 600 mm |
| Dimensions SH-1550 | 2,530 x 2,300 x 600 mm |
| Weight | 3,500 kg / 3,700 kg |
All figures are for the standard build. Custom blade count, conveyor length, panel size and voltage can be specified at order. Electrical and air supply requirements must be confirmed before installation.
